We needed one more little table to go under the Grocery List Board to be a catch all and hold utensils for the Parade of Homes. I knew I could make one faster than take the time to search for one.
Still on an industrial kick from my Industrial Lockers, I headed out knowing what all I needed.
Materials: Everything is in 1/2″ Width
Piece of wood, cut down to size
6 1/2″ floor flanges
8 12″ rods
4 Elbows
4 T’s
2 2″ Nipples
2 1/2″ Nipples
Using my Ryobi Jigsaw, I cut down my wood to the size I needed. Sanded with my Corner Cat Hand Sander and sealed it.
Connect four of the 12″ rods to four of the floor flanges.
Add two T’s to the other side of two of the 12″ rods.
Add two elbow’s to the other side of the other two 12″ rods. (pictured above.)
Add the last two 12″ rods to the opposite sides of the T’s, going up.
Screw in the 2″ nipples into the elbow’s and T’s. (pictured above.)
Add in the 1/2″ nipples into the last two elbows.
Add the two T’s in, connecting the two 2″ nipples and 1/2″ nipple together.
Screw on the last two flanges and attach that to the wood piece.